Printing with complexity has never been easier. Break beyond the boundaries set by unachievable overhangs and the laws of gravity, and enter the possibilities of intricate patterns, degrees of freedom and suspension in space.
NOTE: Infinity Rinse-Away support material is only compatible with PLA and Nylon cartridges
Printing with complexity has never been easier. Break beyond the boundaries set by unachievable overhangs and the laws of gravity, and enter the possibilities of intricate design, degrees of freedom and suspension in space.
Ability to print with movement and articulation in one print.
Rinse away supports are easy and fast to remove for a great looking finished print. No more dealing with "support stubble" left behind with old breakaway supports.
Printing with complexity has never been easier. This revolutionary material enables you to print unachievable overhangs, intricate patterns, and suspension in space.
Currently Infinity Rinse-Away support material is only compatible with PLA and Nylon.
This is a support material and is used for printing supports. It prints in standard resolution. Its resolution does not affect your part resolution.
You can either place your part under running water or place the part in a tub of water. Let the part soak in water for couple of minutes. You can use pliers and brush to clean up the support material. Please watch the video tutorial on the product feature page.
These stickers help reduce shifting in your parts. To use, remove the print pad from your Cube, wipe the three leveling studs with water/ isopropyl alcohol and pat them dry with a towel. Remove one friction sticker from the sheet provided and apply to the top of the leveling stud evenly. Use your finger to press down in a circular motion to remove all air pockets. Repeat for the remaining 2 leveling studs. Place your print pad back on the Cube and proceed to auto level and auto gap.
Adding the stickers to leveling studs may change the auto level of print pad. Having your printer at the right level and gap is important for printing beautiful parts.
It depends on the part size and geometry. Very intricate designs may take a little while longer. On average, for medium sized regular parts, support removal will take less than 15 minutes.
This is a water soluble material. It eventually dissolves in water and is not toxic to use. It is as safe as using craft glue. However, this material is not edible.
It is water soluble and safe to use in home sinks. However, you can scrape away the large chunks of the support material and discard in trash.
This is a support material and can be used only to add supports to your primary part. This material cannot be used to print a primary part itself. Also, your primary parts need to print using PLA material.
Since this is a water soluble support material, there are no colors added to this material. You can remove this material after printing by rinsing it away in water.
For Cube, cartridges sell for each. For Cubepro, each.
If you have purchased Cube cartridges, they are compatible with 3rd generation Cube only. If you have purchased CubePro cartridges, they are compatible with CubePro only. The cartridges are not cross-compatible.