Best surface finish, less supports

With visibly excellent surface finish and surface quality of up to 5 Ra μm (200 Ra micro-inches) less post-processing is required and sharpest corner radiuses are achieved. Due to the proprietary powder deposition system, the DMP Flex 100 builds down to 20° angles without supports.

All overhanging surfaces benefit from the much better surface quality compared to competing machines. Less supports and improved surface quality ultimately mean less post-processing and less material usage –saving time and cost. In addition, you can build parts which are difficult to achieve with other printers.

3D Systems ProX DMP Cufflink

A metal cuff-link with internal lattices printed on DMP Flex 100.

Outstanding accuracy and repeatability, finest details, thinnest wall thicknesses

3D Systems’ patented layer compacting technology allows using smaller particles, which in turn helps to generate the finest feature detail available in the market and thinnest possible wall thicknesses. The typical accuracy on our small metal parts is +/-50 μm (+/-0.002 inches), on large parts +/-0.2%. Repeatability from part to part is approximately 20 μm (0.0008 inches). 3DXpert, 3D Systems’ all-in-one software solution for Design for Additive Manufacturing (DfAM), is included with the DMP Flex 100 to ensure a streamlined and repeatable process for high quality optimized prints.

DMP Flex 100 Laserform CoCr (B) Part With Thin Walls

Thinnest walls and intricate channels in this part printed on DMP Flex 100.

Broad Applications Enabled By Material Capabilities

DMP Flex 100 metal printer has enough power to process a broader material selection spectrum including different grades of Titanium. 3D Systems offers LaserForm CoCr (B) and LaserForm17-4PH (B) with extensively developed, tested and optimized print databases. Further LaserForm materials for use with DMP Flex 100 are in development.

Connector close up

A Lamellar heat exchanger 3d printed in Laserform 316L (B) stainless steel

Everything you need to get started

DMP Flex 100 solution features a build volume of 100 x 100 x 90 mm (3.94 x 3.94 x 3.54 in), a 100W laser, 3DXpert All-in-One Software Solution for Metal Additive Manufacturing and a portfolio of qualified LaserForm metal powders. The DMP Flex 100 metal printer offers the flexibility of manual material loading.

Small Footprint

The smallest of the DMP line, DMP Flex 100 is designed as the entry point to 3D printed metal manufacturing of small, complex fine detail metal parts at high quality using Direct Metal Printing (DMP).

DMP Flex 100 angle printer image
DMP Flex 100 front printer image
DMP Flex 100 angle printer image
DMP Flex 100 front printer image

About this printer

Applications
  • Small, complex precision parts
  • Research and development
  • Simplified assemblies/reduced number of parts
  • Reduced weight/lightweight design
  • Enhanced fluid flow
  • Jewelry manufacturing
Benefits
  • Exceptional surface finish and resolution
  • Prints parts that others struggle to print
  • Minimal waste of materials
  • Consistently high accuracy parts even on first-time builds
  • Ease of use ‒ intuitive workflow
  • Complete solution (printers, materials, software and application support)
Tech Specs
  • Uses Direct Metal Printing (DMP) technology
  • Build volume (W x D x H): 100 x 100 x 90 mm (3.94 x 3.94 x 3.54 in) –height inclusive of build plate
  • Surface finish quality of up to 5 Ra μm (200 Ra micro inches)
  • High precision and repeatability
  • Intuitive 3DXpert software for part set-up and production
  • LaserForm materials with certified parameters

Commonly Used Materials for the DMP Flex 100

Lamellar heat exchanger printed in LaserForm 316L (B)

LaserForm 316L (B)

Able to be sterilized and highly corrosion resistant.

3D Systems DMP Stainless Steel 17-4PH Gear Pulley

LaserForm 17-4PH (B)

Excellent corrosion resistance, high strength with good toughness

3D Systems Cobalt Chrome Dental Teeth Platform

LaserForm CoCr (B) or (C)

Highly corrosion and wear resistant, suitable for biomedical

  • All-In-One Integrated Software for Industrial Additive Manufacturing

    3DXpert is an all-in-one integrated software to prepare, optimize and manufacture 3D CAD models using industrial additive manufacturing (AM). Supporting every step of the additive manufacturing workflow from design to post-processing, 3DXpert streamlines your process to quickly and efficiently transition from a 3D model to a successfully printed part.

    Learn More

  • A new level of management in 3D production

    3D Connect Service provides a secure cloud-based connection to 3D Systems service teams for proactive and preventative support, enabling better service to improve uptime and deliver production assurance for your system.
    Learn More

Interested in purchasing this printer?

I consent to receive 3D Systems Communications
Would you like to receive special offers, product updates, and event news from 3D Systems? By clicking "Yes", you agree to receive follow-up communications from 3D Systems or our partners. You can also choose to opt out of communications at any time. Please click here to view our Privacy Policy or click here to manage your Preferences.

You Might Also Be Interested In

DMP Factory 350 Duel 3D Printer

DMP Factory 350 and DMP Factory 350 Dual

Scalable, high quality metal AM with integrated powder management

DMP Flex 350 Duel 3D printer

DMP Flex 350, DMP Flex 350 Dual and DMP Flex 350 Triple

Robust, flexible metal 3D printer for rapid part production

  • Application Innovation Group

    Our team can help you solve your most difficult design and production challenges with additive manufacturing solutions. Together we’ll identify your needs, working with you to optimize your designs, prototype, validate and define a manufacturing flow.