Accelerate and de-risk your additive manufacturing application development
Structural Ti or Al-alloy components for space flight since 2015
Critical Passive RF flight parts since 2017
Satellites with 3D Systems produced flight hardware on board

Limited Time Offer for Exclusive 3D Printer Bundles!

Act now and unlock massive savings on handpicked metal printers, complete with maintenance, training, and exclusive extras!

Reduce Weight, Improve Functionality, and Consolidate Parts

On-Demand Webinar: Generation of Titanium Material Allowable Data for Laser Powder Bed Fusion

3D Systems has generated a high-fidelity dataset including a wide range of mechanical and material properties for LaserForm Ti Gr23 (Ti-6Al-4V ELI) printed on the DMP Flex 350.

Additive Manufacturing Applications for Aerospace and Defense

  • Communication Satellite Orbiting the Earth
  • Passive Radio Frequency (RF) Hardware

    Passive RF hardware is a family of parts that conduct an electromagnetic signal. They can guide, filter, modulate or amplify a signal in different stages of a typical communication chain from earth to a satellite and back. Learn more about the drivers to select our technology to design and manufacture these components.

  • Lightweight Aerospace Bracket from Thales
  • Lightweight Brackets

    Use our advanced direct metal printing to produce lightweight aerospace parts at reduced operational costs that enable greater fuel efficiency. Using topological optimization, you can design highly complex features that maintain or even improve material strength.

  • Cutaway of a DLR 3D Printed DMP Fuel Injector
  • Propulsion & Space Launch

    Create fewer, optimized parts while lowering the costs of manufacturing. Using our additive manufacturing and consulting for aerospace and defense enables a single 3D printed component to replace multiple subcomponents. This means consolidating these subcomponents into a monolithic design, which contributes to weight reduction, fewer bolted and welded joints, and improved overall system performance.

  • Certified Oxygen-Free Copper (A) combustion chamber
  • Heat Exchangers

    Maximize heat transfer and minimize temperature fluctuations by integrating heat-exchanging structures into a single, 3D printed design. Unlike traditional methods, our leading additive manufacturing allows for the production of efficient, high-performance thermal management parts through a streamlined process that reduces time to market.

  • Investment Casting Applications for Aerospace
  • Investment Casting Patterns

    Skip the expense of injection molding tooling for casting patterns. Our advanced software, hardware, and materials enable you to use investment casting workflows to cast 3D printed molds in a fraction of the time and cost. Aerospace parts manufacturers can move directly from CAD to casting pattern with fewer design limitations and quickly create hollow patterns capable of far greater design complexity.

NoSupports enables metal powder-bed printing without support structures.

Powered by 3DXpert software, NoSupports expands the design envelope, accelerates design cycles, and unlocks new applications. 

Customer Stories
The company has significantly reduced costs and lead times with large format pellet extrusion 3D printing by 3D Systems

Duo Form, a leading thermoforming provider for wide-ranging industries, is enhancing its production abilities with polymer pellet-extrusion additive manufacturing (AM). In partnership with 3D Systems, Duo Form integrated AM into their manufacturing processes, utilizing their EXT 1270 Titan Pellet 3D printer to produce representative samples, production molds, and tools for thermoforming and vacuum forming. The results are reduced costs, faster lead times, and increased flexibility.

Read more
Increasing in-house production with the DMP Flex 350 expands Molyworks titanium operation and opens the door to new engagements....
Read more
3D Systems collaborates with Thales Alenia Space in the field of design for additive manufacturing (DfAM) to improve performance of a critical sub...
Read more

3D Systems Helps Aerospace and Defense Manufacturers Maximize Efficiencies

  • Dedicated Industry Expertise

    3D Systems has in-house aerospace industry experts across all major aspects of aerospace parts manufacturing, from engineering and design to certification and production. Our experts work with you to optimize your efforts in manufacturing aerospace components for commercial, business, military, aviation, and space applications.

  • Guided Implementation and Support

    Based on more than a decade of leading-edge manufacturing within highly regulated environments such as healthcare, aerospace, and high tech, we provide you with unique insights, assist in the certification process, and enable a streamlined pathway to full-scale manufacturing using our innovative technology. 

  • A Strong ROI

    Our two AS/EN9100 production facilities allow for parallel paths to application development and on-site customer process development. This streamlines the implementation of additive manufacturing and results in an ROI of up to 60%.

  • Additive Manufacturing You Can Trust

    We help maximize your manufacturing process to reduce costs while achieving greater consistency and reliability in your final aerospace components. We work with you to scale your additive manufacturing capabilities at your own pace, and help you ensure traceability and transparency for regulatory and quality control requirements.

  • A Focus on Research and Design

    As demands in the aerospace and defense industries evolve, our additive manufacturing ensures that you can continuously innovate your production and products. Using our in-house expertise, we remain at the forefront of change, developing advanced technology and materials for aerospace applications.

Talk to an Expert

Which finance offer is most important to you?
1= Not important at all and 10 = Extremely important

I agree the items, technology/technical data and/or services will not be used for any purposes, to include design, production, assembly, testing, operation, integration, installation, inspection, maintenance, repair, overhaul, or refurbishment, related to a military or defense application or military End-Use or by a military End-User in the People’s Republic of China, Venezuela, Burma (Myanmar) or Russia; or any other country, state or province named in US Regulation 744.21 Supplement 2. The product(s) software, and/or technology acquired from 3D Systems will not be re-exported, sold or otherwise re-sold or transferred to a destination subject to UN, EU or OSCE embargo where that act would be in breach of the terms of that embargo sold, or transferred inviolate on of Council Regulation (EC) No 428/2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items;We will not sell, transfer, export, or re-export any items received from 3D Systems for use in activities that involve nuclear explosive activities; unsafeguarded nuclear activities; nuclear fuel cycle or nuclear propulsion activities; or in the design, development, production, stockpiling, or use of chemical weapons, biological weapons, missiles, rocket systems or unmanned aerial vehicles (UAV)

I consent to receive 3D Systems Communications
Would you like to receive special offers, product updates, and event news from 3D Systems? By clicking "Yes", you agree to receive follow-up communications from 3D Systems or our partners. You can also choose to opt out of communications at any time. Please click here to view our Privacy Policy or click here to manage your Preferences.
  • Application Innovation Group

    Our team can help you solve your most difficult design and production challenges with additive manufacturing solutions. Together we’ll identify your needs, working with you to optimize your designs, prototype, validate and define a manufacturing flow.