Stereolithography

Type of Finish Description
Strip & Ship Remove supports, wash & post cure
Standard Remove supports, wash, post cure, sand areas where supports were attached with 220 grit sandpaper, water hone (150 white grit sand)
[Note: ABS Black parts receive an additional coat of black spray paint.]
Pattern Standard plus remove all layer lines on the outside surface with 320 grit sandpaper, water hone (150 white grit sand)
Primed Pattern plus spray with primer
Paint Pattern plus spray with paint
QuickClear Standard plus spray with clear coat
Gloss Standard plus spray with clear coat
WaterClear Standard plus sand all layer lines (inside and outside) with 600 grit sandpaper and spray with clear coat