The LC-3DPrint Box is a revolutionary UV light box, suitable for post-curing 3D printing materials. The new LC-3DPrint Box is equipped with 12 UV light bulbs strategically placed inside the box. This ensures that a product is illuminated from all sides, which results in a quick and uniform curing cycle. The spacious interior (ø 26 cm, H 19,5 cm) allows you to easily cure multiple products at once. In addition, the box has enough space to place an articulator inside. If necessary, the UV light bulbs can be changed easily.
The new LC-3DPrint Box allows you to post-cure NextDent 3D materials. Post-curing is required in order to obtain the final material properties. After the printing process the printed material is not yet fully cured and should be treated. First, the material needs to be cleaned in an alcohol bath followed by the post-curing cycle. Post-curing is an UV light treatment to ensure that NextDent materials obtain full polymer conversion, through this the residual monomer is reduced to a minimum and the highest mechanical properties are obtained. This procedure is a necessary step to produce a biocompatible end-product.Always follow the instructions for use relevant to the corresponding material.
The LC-3D Mixer is a roller/tilting stirring device for mixing 3D printing materials before pouring in the Resin Tray of the printer. Print resins must be mixed well. Only handshaking is insufficient for highly filled and colored materials. The LC-3D Mixer should be used to thoroughly mix the material. When mixed insufficiently color deviation and print failures may occur. The NextDent LC-3D mixer keeps your NextDent 3D materials ready for use at any time at an optimum consistency.