High Quality Powder and Process Management
The DMP Factory 350 has an integrated powder management system with high-performance sieving and significantly limited operator exposure to powder. The O2-free atmosphere of the powder workflow (consistently below 25ppm) guarantees highest part quality as well as maximum powder usage.
The specific printer architecture of the DMP 350 and 500 series repeatedly produces high part quality even for complex lattices and when processing challenging metal alloys.
Designed for Scaling Production
Automated workflow steps and a small footprint for reduction of overall required floor space help you efficiently scale your metal AM production. The real-time process monitoring with DMP Monitoring adds traceability and contributes to informed decisions on quality.
Bracket for mounting geo communication antenna reflectors. Topologically optimized struts allow for weight and cost savings.
Achieve High Quality Performance Even Faster
Now DMP Factory 350 comes in a two-laser configuration, reducing build times by up to 50 percent. The DMP Factory 350 Dual maintains the high quality and repeatability of the single-laser configuration while boosting productivity for lower operational costs.
Printing 500,000 Challenging Parts Per Year
The DMP Factory 350 and DMP Factory 350 Dual have been developed through a continuous feedback loop between the production teams in our advanced manufacturing centers and product development. With this technology 3D Systems offers you an integrated solution for metal additive production. The DMP Factory 350 printer with its unique features, the extensively tested suite of LaserForm materials, 3DXpert metal additive manufacturing software, and, finally yet importantly, the expertise of our application engineers efficiently and reliably enables our customers to realize time, cost and functionality benefits.
How Nuvasive enabled new implant designs and scaled their production.
Integrated Material Management
High throughput, highly repeatable metal AM system that generates precision quality parts from a broad range of alloys with high quality material management for maximum powder usage. For companies scaling their metal AM production and requiring limited operator exposure to powder.
High Quality, High Throughput, Low TCO
The DMP Factory 350 and DMP Factory 350 Dual are high-performance metal additive manufacturing systems that provide a heavy-duty alternative to traditional metal manufacturing processes: With a build volume of 275 x 275 x 420 mm (10.82 x 10.82 x 16.54 in) it offers repeatable, high quality parts, low total cost of operation (TCO) for affordable part costs with an integrated high quality powder and process management.
About this printer
- Reduced weight/light-weight design
- Orthopedic and spinal implants
- Simplified assemblies
- Reduced number of parts
- Conformal cooling
- Enhanced fluid flow
- Conformal latticework
- Topology optimization
- Mass customization
- Uses Direct Metal Printing (DMP) technology
- Contained, automated powder management
- Build volume (W x D x H): 275 x 275 x 420 mm(10.82 x 10.82 x 16.54 in) –height inclusive of build plate
- Unique vacuum chamber concept (O2< 25ppm)
- Material-type dedicated
- Fast bi-directional powder deposition
- Enhanced productivity & management with central DMP server
- Real-time process monitoring with DMP Monitoring
Commonly Used Materials for the DMP Factory 350 Printer
LaserForm Ti Gr1 (A)
Light weight, biocompatible, extreme temperature and corrosion resistance
LaserForm Ti Gr5 (A)
High strength, low weight, excellent biocompatibility
LaserForm Ti Gr23 (A)
High strength, low weight, excellent biocompatibility - lower Oxygen than Gr5
LaserForm AlSi10Mg (A)
Good mechanical properties and good thermal conductivity
LaserForm AlSi7Mg0.6 (A)
Light weight, good mechanical properties and improved thermal conductivity
LaserForm Ni625 (A)
Excellent corrosion resistance, high strength and heat resistance
LaserForm Ni718 (A)
Oxidation, corrosion and extremely high-temperature resistant
LaserForm 316L (A)
Able to be sterilized and highly corrosion resistant.
Certified Scalmalloy (A)
High strength aluminum with excellent corrosion resistance
Certified M789 (A)
Cobalt free, high strength tool steel with excellent corrosion resistance
Commonly Used Materials for the DMP Factory 350 Dual Printer
LaserForm Ti Gr5 (A)
High strength, low weight, excellent biocompatibility
LaserForm Ti Gr23 (A)
High strength, low weight, excellent biocompatibility - lower Oxygen than Gr5
LaserForm AlSi10Mg (A)
Good mechanical properties and good thermal conductivity
LaserForm AlSi7Mg0.6 (A)
Light weight, good mechanical properties and improved thermal conductivity
Interested in purchasing this printer?
You Might Also Be Interested In
DMP Flex 350 and DMP Flex 350 Dual
Robust, flexible metal 3D printer for rapid part production
DMP Flex 100
Affordable, precise metal 3D printer for finest features and thinnest walls