Three lasers and advanced materials in a midsize frame
DMP Flex 350 Triple is ideally suited for Aerospace & Defense applications where flexible build volume, productivity, and seamless construction are critical. Go further with your Aerospace & Defense additive manufacturing programs with Direct Metal Printing:
Accelerate time-to-market
Conduct R&D, develop prototypes and manufacture production parts all in the same system. DMP users design faster and shorten production times. Transform complex assemblies taking hundreds of hours to manufacture and assemble into a single high-value part printed in hours.
Increase manufacturing agility
Metal additive manufacturing requires no tooling. You are able to quickly update designs and change production to meet variable market demands.
Streamline supply chains
With DMP, you have complete control over your production without relying on specialty components from suppliers. Print entire assemblies on demand, with fewer components.
Larger build capacity, same footprint
The DMP Flex 350 Triple features a larger Removable Print Module with a 350 x 350 x 350 mm build volume in addition to the standard RPM with 275 x275 x 420 mm build volume. This makes the DMP Flex 350 Triple the most compact system that supports a 350 x 350 mm build area ideal for cost-effective manufacturing of parts like impellers or cooling plates that fit between typical mid and large-frame system sizes. Swap between RPMs in as little as 30 minutes to enable more throughput and a wider variety of applications on the same compact platform.
Seamless 3-laser load-balanced print capability
The DMP Flex 350 Triple utilizes advanced multi-laser load balancing and seamless surface quality scan strategies. There is no visible seam or perceptible change in roughness in zones where multiple lasers work together. The DMP Flex 350 Triple enables a productivity and throughput increase of up to 30% over the DMP Flex 350 Dual and DMP Factory 350 Dual.
Improved argon gas flow system
The DMP Flex 350 Triple has an upgraded argon gas flow system that pushes a steady stream of argon across the build plate, while strongly vacuuming it out at the back of the build chamber. This new system ensures prompt, thorough removal of soot and condensate from the build area.
Ready to get started?
DMP Flex 350 Triple Aerospace & Defense Applications
DMP Flex 350 Triple is ideal for a variety of Aerospace & Defense applications including: heat exchangers, EVTOL motor components, fuel injectors, swirlers, mixers, stator vanes, impellers, lightweight structure, and passive RF components.
Case Study: Thales Alenia Space Disruptive Corrugated C-band Horn Antenna
Check out this exciting project from Thales Alenia Space and 3D Systems up-close. This part demonstrates how we are bringing higher productivity, larger parts to the mid-frame DMP Flex 350 system.
- Improved productivity from 3 in-line lasers
- Center laser with full coverage for seamless parts
- Available expanded build volume – 350 x 350 x 350 mm
- Software: 3DXpert
- Material: LaserForm AlSi10Mg
Don't miss the webinar where Thales Alenia Space engineers discuss using AM to manufacture this part!
DMP Flex 350 Triple Materials
Aheadd® CP1
Aluminum alloy with excellent thermal conductivity
LaserForm AlSi10Mg (A)
Good mechanical properties and good thermal conductivity
LaserForm AlSi7Mg0.6 (A)
Light weight, good mechanical properties and improved thermal conductivity
LaserForm Ni625 (A)
Excellent corrosion resistance, high strength and heat resistance
LaserForm Ni718 (A)
Oxidation, corrosion and extremely high-temperature resistant
Certified HX
High-Performance Nickel Alloy
A6061-RAM2 (A)
Improved strength, ductility, and surface finish vs. AlSi10Mg
LaserForm 316L (A)
Able to be sterilized and highly corrosion resistant.